|
|
| |
| |
|
|
| |
| |
| |
| |
Manual Ball Valves in PVC, CPVC, PVDF & Polypro
|
|
|
 |
|
| |
|
|
|
|
|
| |
|
|
|
| |
|
|
|
| |
|
|
|
| |
|
|
|
| |
|
|
|
| |
|
|
|
|
|
| |
Manual Ball Valves in PVC, CPVC, PVDF & Polypro |
| |
Design Advantages:
- Heavy-duty, large diameter shaft eliminates stem breaks.
- Double shaft O-rings.
- PTFE shaft bearing eliminates friction and wear.
- PTFE seats backed up with O-rings reduce the wear and tear of repeated cycling.
- Trunnion Design: Upper and lower supports retain ball under pressure. Trunnion design allows multi-directional flow; means that the valve is in no danger of being installed "backwards."
- Concentric machined and mirror-polished ball.
- Dual sliding seats use triple O-rings for balance and maximum leak protection.
- Smooth flow path eliminates pressure loss.
- True union ends for ease of piping and removal.
|
| |
Features:
- Now available in 3" and 4" sizes!
- Molded mounting brackets for excellent support and ease of piping installation.
- Pressure rated at 175 PSI (11,91 BAR). Kynar® PVDF ball valve rated to 232 PSI.
- Plast-O-Matic True Blue Ball Valves sizes 1/2", 3/4", 1", 1¼", 1½" and 2" are 100% molded, machined & assembled in Cedar Grove, NJ, USA. Some materials on 3" and 4" valves are imported, however, all machining & assembly is done in Cedar Grove, NJ, USA.
- 100 percent pressure tested at our factory in Cedar Grove.
- Available in Geon® PVC, Corzan® CPVC, Natural (virgin, unpigmented) Polypropylene, and Kynar® PVDF. Available seal materials are EPDM and Viton®. Other materials available; minimum quantities apply.
|
| |
Available with NPT threaded connections, sockets, flanges (except PVDF), metric, or BSP.
Install as manual valve today, add an actuator tomorrow with no special kits or modifications...True Blue electric or pneumatic actuators can be added in about a minute! |
| |
| |
Dimensions & Specifications:
|
|
Pipe Sizes |
Weight ** in PVC |
A
Thd & Socket |
A-1
Flanged
|
|
|
|
|
F |
G*
Bolt Center |
NPT
BSP
|
MM |
Lbs. |
Kg. |
In. |
MM |
In. |
MM |
In. |
MM |
In. |
MM |
In |
MM |
In |
MM |
In |
MM |
In |
MM |
1/2 |
20 |
.5 |
.2 |
4 1/8 |
104.8 |
6 1/8 |
155.6 |
3 |
76.2 |
3 1/8 |
79.4 |
2 |
50.8 |
2 1/4 |
57.2 |
2 |
50.8 |
1 3/4 |
44.5 |
3/2 |
25 |
.8 |
.3 |
4 5/8 |
117.5 |
7 1/8 |
181.0 |
3 3/4 |
95.3 |
3 3/4 |
95.3 |
2 1/2 |
63.5 |
2 3/4 |
69.9 |
2 1/2 |
63.5 |
2 1/4 |
57.2 |
1 |
32 |
1.1 |
.5 |
5 1/2 |
139.7 |
8 |
203.2 |
4 5/18 |
111.1 |
3 3/4 |
95.3 |
3 |
76.2 |
3 1/4 |
82.6 |
3 5/15 |
73.0 |
2 1/2 |
63.5 |
1 1/4 |
40 |
2.3 |
1.1 |
6 1/2 |
165.1 |
9 1/4 |
235.0 |
6 1/8 |
155.6 |
4 1/2 |
114.3 |
4 |
101.6 |
4 1/8 |
104.8 |
4 1/4 |
108.0 |
3 5/16 |
84.1 |
1 1/2 |
50 |
2.5 |
1.1 |
6 3/4 |
171.5 |
9 3/4 |
147.7 |
6 1/8 |
155.6 |
4 1/2 |
114.3 |
4 |
101.6 |
4 1/8 |
104.8 |
4 1/4 |
108.0 |
3 5/16 |
84.1 |
2 |
63 |
2.7 |
1.2 |
8 |
203.2 |
11 3/8 |
288.9 |
6 1/8 |
155.6 |
4 1/2 |
114.3 |
4 |
101.6 |
4 1/8 |
104.8 |
4 1/4 |
108.0 |
3 5/16 |
84.1 |
* Center line of bolt holes. **For weight in CPVC, multiply by 1.1, for polypro multiply by .66 and for PVDF multiply by 1.3 |
|
|
| |
Ordering Information:
|
| MBV 075 X V T - PV |
|---|
| Valve Pipe Size |
X-BSP Threads
(OMIT "X" if not BSP) |
Seal Material |
Connections |
Body Material
(See Note) |
050 (½ in.); NPT/BSP |
or metric |
V-Viton |
S-Socket Ends |
PV-PVC |
075 (¾ in.); NPT/BSP |
sockets |
EP-Ethylene |
T-Threaded Ends (NPT) |
CP-CPVC (Corzan®) |
100 (1 in.); NPT/BSP |
|
Propylene |
F-Flanges (except PVDF) |
PP-Polypro |
150 (1-½ in.); NPT/BSP |
|
|
|
PF-PVDF/Kynar® |
200 (2 in.); NPT/BSP |
|
|
|
|
300 (3 in.); NPT |
|
|
|
|
400 (4 in.); NPT |
|
|
|
|
20; 20mm, socket only |
|
|
|
|
25; 25mm, socket only |
|
|
|
|
32; 32mm, socket only |
|
|
|
|
40; 40mm, socket only |
|
|
|
|
50; 50mm, socket only |
|
|
|
|
63; 63mm, socket only |
|
|
|
|
90; 90mm, socket only |
|
|
|
|
110; 110mm, sckt, PP or PF only |
|
|
|
|
|
|
| |
|
|
