plastomatic Actuated & Manual Ball Valves, Series MBV

Untitled Document

	Actuated & Manual Ball Valves

		Series MBV

		Series MBV 3" & 4"

		Series LMBV

		Series EBVA

		Series EBV 3" & 4"

		Series ABV

		Series ABR

		Series ABR 3" & 4"

		Series TABV & TABR

		Series TEBV

		Limit Stops (Series LS)

		Limit Switches (Series SW)

		Vented Ball Valves

Series MBV 3" & 4"
½" - 2" Manual Ball Valves, 2-way, larger sizes.

SERIES MBV • 2-Way Manual Ball Valves 3" & 4"

An engineered true union ball valve for manual and actuated valve applications

Features:
• Full port.
• Bi-directional flow.
• Low maintenance and extended operational life.
• Handle equipped as a spanner device to adjust carrier.
• PTFE seat energized by O-ring.
• Ball machined and tumbled to ensure roundness.
• Special mounting pads are molded on body for actuator
mounting or valve anchoring.
• Blow-out proof stem.
• Safety shear stem design.
• Double O-ring seal on stem.

Materials of Construction:
PVC: Class 1245B per ASTM D1784\
CPVC: Class 1245B per ASTM D1784
PP: Class PP 110B76383 per ASTM D4101
PVDF: Type 1 per ASTM D3222
Seals: EPDM or FKM
Seats: PTFE

Approximate Flow Rates at 1.0 PSI (0,07 Bar) Pressure Drop
Valve Sizes	3"	4"
Cv Factor	485	768

SERIES EBV - Electrically Actuated Ball Valves 3" & 4"

Lightweight and rugged, this all-thermoplastic enclosure is designed to meet NEMA 4 standards

Features:
• Heavy-duty gears can reduce down time due to gear failure.
• Permanent lubrication requires little or no maintenance.
• NEMA IV enclosure, provides protection against splashing, seepage, falling or hose-directed water and severe external
applications.
• Open/Close Limit Switches: SPDT limit switches permit independent fine-tuning of open and close position.
• Cam-adjusted limit switches assure fast and easy adjustments.
• Actuators can be mounted and operated in any position
• Actuators can be used on diverse valve types and in a wide range of applications
• Thermally bonded polyester coating provides a high degree of corrosion resistance
• Stainless steel fasteners provide maximum corrosion protection for severe applications
• Terminal strip assures a fast and easy field installation.
• Electronic torque limiter should the actuator become stalled.
• Reversing Motor, 530 in/lbs.torque.

Accessories & Options:

• Auxiliary Switches: Dry contact switches for position indication or control of peripheral equipment.
• Feedback Potentiometer: Resistive position feedback and control applications
• Control Relays: Two wire control applications.
• Heater and Thermostat: Low temperature or high humidity applications
• Breather and Drain:Humidity control
• Proportional Positioner: Control applications using analog (4-20mA, 0-10dc) signals.
• Feedback Transmitter: Position feedback, 4-20mA
• Speed Control: Applications requiring slow cycle times, i.e. water hammer.
• Timers: Repeat cycle applications, valve open and close at same time every day.
• Visual Indicator: Fast visual valve position indication
• Torque sensor: Shuts actuator off in stall condition.
• Controls: Simple on/off to process control for temperature, pressure, flow, etc.
• Mounting Hardware: To adapt actuator to valve.